CARGOS 760-740

The CARGOS 700 forage transport wagon.

The CARGOS 700 is available with load volumes of 48.5, 42.5 and 36.5 m3.

CARGOS 760-740

The CARGOS 700 forage transport wagon.

The CARGOS 700 is available with load volumes of 48.5, 42.5 and 36.5 m3.

The transport wagon.

CARGOS 700

The front side.

Modern design combined with functionality: the front grille has been carefully designed with just the right amount of perforations to allow a clear view of the wagon interior while still ensuring that the crop can slide over the remaining smooth surfaces.

Maximum load volume combined with superior manoeuvrability.

All models have a front grille angled at 30° and a tapered body widening towards the rear to maximise the load volume. This means that the wagons can be kept extremely short and therefore highly manoeuvrable.

Additional side panel extensions are available for all three models to further increase the load volume.

CARGOS 700

The body.

The 300-mm-high C-profile and the stable floor in the CARGOS 700 models ensure maximum stability. As a result, all models are approved for wood chip transport. This gives the CARGOS an unrivalled level of reliability, both on long road trips and over rough terrain.

CARGOS 700

The floor conveyor

The steel floor is hot-dip galvanised and therefore corrosion-resistant and extremely durable. The four solid flat conveying chains have a high breaking load. The sprockets that engage with the flat conveying chains in the deflection area ensure reliable crop guidance. At the same time, the chains are cleaned of wood chips or any other crop residue during the deflection process. This reliably prevents any crop materials from becoming jammed in the chains.

CARGOS 700

Chain tensioning.

Floor conveyor chains only work reliably with low wear if they are perfectly tensioned. Easy access to the floor conveyor chains means they can be conveniently tensioned at any time.

CARGOS 700

The drawbar.

The slimline drawbar permits very wide steering angles. The stand is integrated into the drawbar for added protection and simply folds down for unhitching.

For optimum comfort on the road or in the field, drawbar suspension with two accumulators is available as an option for the CARGOS 700.

CARGOS 700

Discharge roller module with drive train.

The two open discharge rollers are designed to achieve maximum throughput, while the sturdy tines arranged in a helix formation ensure that the crop is evenly distributed on the clamp. The drive operates via a single wide-angle drive shaft.

CARGOS 700

Removal of discharge rollers.

If necessary, the discharge roller module can be removed in no time to increase the discharge speed. The gaps can be closed with optional side panels.

Removal reduces the weight by approximately 500 kg. It also increases the load volume, for example for wood chip or maize transport.

CARGOS 700

The special articulating drawbar.

Drivers can lower the hydraulic articulating drawbar to increase the target surface area when chopping in a forward direction. They can then easily direct the crop into the wagon, where it belongs – not just when driving straight ahead, but also when cornering. This also makes it easier to hitch and unhitch the wagon, as the drawbar can be set to the desired height at the push of a button

Faster discharging.

Raising the drawbar speeds up the discharge process significantly. The loaded material is immediately tipped backwards, and residue is conveyed faster from the wagon. In addition, features such as the tapered design and the floor conveyor driven on both sides, together with the option of two discharge speeds, all facilitate rapid unloading at the clamp.

Further benefits.

Both hitching and unhitching are easier, because the drawbar can be set to the correct height at the push of a button.

If necessary, traction can also be increased, thereby reducing slip, since the wagon wheels move closer to the rear of the tractor when the articulating drawbar is raised.

Thanks to the generously dimensioned drawbar lift rams, the hydraulic articulating drawbar can securely lift the wagon upwards, even when fully loaded. In addition, the optional drawbar suspension via two accumulators guarantees optimum ride comfort for road journeys at all times.

Load securing for the forage transport wagon.

A double-sided loading bay cover is available as an option for all CARGOS 700 models, regardless of whether they come with comfort or standard hydraulics. The cover can be operated from the comfort of the cab using the control terminal (or the dual-acting spool valve in the standard version). This is the quick and reliable way to protect your valuable load.